What is Pacor system and who benefits
Pacor development history
Test reports
Gallery

Documentation
FAQ
 
Advanced Computer technologies for Processing of Rough diamonds
External cut
 
Pacor Client
Oxygen Inclusion
Oxygen Viewer Free Version

Test CPU performance of the Pacor, Helium Rough and Oxygen Software
 
FaQ's
 
DiamCalc
DiBox
iGM 2.0
GemAdviser Free Version
Helium IG
Helium Polish
Helium Rough
Helium Tender
M-Box 2.0
M-Box 1.5
M-Box
Oxygen DZ
Oxygen HIG
Oxygen Immersion
Oxygen Inclusion
Oxygen Microscope Server
Oxygen Viewer Free Version
Oxygen XRay Server
Pacor
Pacor Client
Stereo Viewer Free Version
ViBox

PACOR - Advanced Computer technologies for Processing of Rough diamonds
Laser Mapping of Concavities
Scanning major and minor symmetry features
Technology patent "A method and apparatus for locating inclusions in a diamond stone"
Immersion Glass
 
Advanced Computer Technologies
for Processing of Rough diamonds

Lecture by S.Sivovolenko in HRD
December 11, 1997

 

 

The purpose of my lecture is to inform you of the instrument we created for evaluation and marking of rough diamonds above 3 carat.

First, I would like to note that we did not aim to make a fully automated device for rough diamond cutting. Our aim was rather to create equipment allowing the expert to noticeably raise the processing efficiency on wide range of rough diamonds. To illustrate the difference, let me bring the following example to your attention. Imagine an expert marking the same lot with and without using a leverage and weight tables. No doubt, there will be stones marked equally. The more experienced is the expert, the more such stones there will be. But, I think you agree that the efficiency will be greater in case of using the tools.

Now if the expert marked the same lot with our system, the efficiency will have extra gain.
Here you can see results of the tests held with one of the best Russian experts in 1994.

The main features of the system are:

  • Rough diamond marking and evaluation with deep analysis of internal characteristics.
  • Control of bruiting and first-step polishing of a diamond.
  • Finding new options of marking.
  • Creating of electronic passport for rough and polished diamonds.

The biggest effect can be achieved with rough diamonds above 5 carats. The yield increases by 1-4%, clarity improves by one grade, and some diamonds move one position up in weight grading.
The best results were obtained with the forms of SHAPES, FLATSHAPES, CLEAVAGES, and qualities of SPECULATIVE and DARK.

One of the main benefits of the present system is that the fully automated processes of model creation and searching for options of marking allow meddling of the operator, who can move diamonds, change their parameters, set the marking plane position and etc. This allows for most complete exploiting of the expert's knowledge and the computing power of the system.

The program features:

  • Detecting the most profitable option of rough marking.
  • Diamond model building with respect to optical distortions (non-parallel projection).
  • High precision estimation of future diamond weight, position of inclusions in future diamonds. Observing real and imaginary inclusions.
  • Automated search for the largest possible diamond with respect to parameters and inclusions, estimating mutual location of the future diamond
  • and inclusions with precision of at least 100 micrometers.
  • Automated drawing of the marking line.
  • Various cut shapes: ROUND diamond, MARQUISE, PEAR, EMERALD, FLOWERS, PRINCESS and others.
  • Marking of a rough into more than two polished diamonds.
  • Efficiency analysis of double warps of the marking line.
  • Calculations of inclusion positions in case of cuvette with immerse liquid.

Technical features of the optical set:

  • Effective processing of the rough from 1 to 20 carats is supported due to the zoom feature with range of 1 to 3.
  • Robust is setting of inclusions up from VS2/SI1.
  • 70 micrometer average precision of surface model building.
  • Marking line drawing in two opposite directions, with angle precision of 0.8 of degree and linear translation precision of 100 micrometers.
  • Two light sources with computer-driven brightness for effective inclusions recognition.
  • Stone rotations around two axes.

Description of the System

The operator can apply both fully automated and interactive methods, considering the system as a simple 3-dimensional intelligent estimator (leverage). Combination of different methods is essential with rough diamonds above 10 carats.

The crystal holder has up to two rotational freedoms and up to 2 linear translation freedoms. Usually, from 50 to 200 projections of the sample rotated around the vertical axis are used for creation of electronic crystal model. With complicated shapes (MACCLES, MAKEABLES, and CLEAVAGE), it is useful to add horizontal rotation projections.

It takes about 1.5-2 minutes to build the surface model of a rough diamond of 3 carats. During that process, 50 projections are built, and the precision of 100 micrometers is achieved. About 200 projections are necessary for a 20-carat diamond model. The software allows observing the backside bones of a model (those depicted with dashed line), with or without respect to refraction. The model on the right picture is shown with refraction.

Once the surface model is built, the operator can run procedures for detecting the maximum polished diamond, maximum yield marking, and maximum total price of two diamonds. (At this stage, the optimizations are done without respect to i nclusions).

Next step is to set the inclusions in the model. The images of inclusions pointed to by operator are shown in yellow. The actual locations are shown in blue. The operator has no need to set each inclusion. He or she can consider the most important ones and proceed with them only.

Different options of marking are found during this step. Those options are calculated considering inclusions and processing conditions.

Here is a DARK STONE of 12.85 carats with two options of marking. The inclusion is under the crown of the larger diamond on the depth of 500 micrometers. We can see images of the inclusions (including the reflected ones) within the future diamond from various points of view. The upper line determines the marking option with the largest clear diamond.

Now the operator can interactively correct the marking considering conditions of the processing, such as using natural facets of a diamond.
If the expert does not want the option generated automatically, he or she can set the marking position manually and run the optimizing process for it.

Conclusions

  • Non-contact marking technique allows working with stones of any shapes.
  • Inclusion recognition (location) AND processing of non-convex surfaces became easy by two-rotation freedom, two sources of illumination (front and back) and software support for inclusion localization.
  • Optimization with all parameters of the standard cut taken into account.
  • Advantage in efficiency by precision withdrawal of inclusions and yield raise.
  • Light (hardware-free) version of software for training of a new expert.
  • Optimization on the base of microtomographic data set for non-destructive shape analysis and internal inclusion localization.